UPS-SD
UPS-SD
| Model No. | 500VA/300W | 650VA/390W | 1000VA/600W | 1200VA/720W | 1500VA/900W | 2000VA/1200W | |
| Technology | Line Interactive | ||||||
| INPUT | Voltage Range | 160V~250V AC / 80V~140V±5V AC | |||||
| Nominal Voltage | 220V/230V/240V/110V/120V AC | ||||||
| Frequency | 45~65Hz | ||||||
| Max. Current | 1.8A | 2.4A | 3.8A | 4.5A | 5.6A | 7.5A | |
| OUTPUT | Nominal Voltage | 220/230/240±2%VAC | |||||
| Max. Current | 1.5A | 2.0A | 3.0A | 3.6A | 4.5A | 6.1A | |
| Voltage Range (Normal Mode) |
220V/230V/240V/110V/120V AC ±10% | ||||||
| Voltage Range (Battery Mode) |
220V/230V/240V/110V/120V AC ±10%(Modified Sine Wave) | ||||||
| Frequency (Normal Mode) |
Synchronized(Sine Wave) | ||||||
| Frequency (Battery Mode) |
50/60Hz±0.5Hz | ||||||
| Waveform | Modified Sine Wave | ||||||
| Power Factor | 0.9 | ||||||
| Efficiency | >90% | ||||||
| Transfer Time | <10ms | ||||||
| BATTERY & RUNTIME |
Battery Type | Maintenance-free Sealed Lead-acid Battery, Leakproof | |||||
| Included Battery Modules |
1*12V/7.0Ah | 1*12V/7.2Ah | 2*12V/7.0Ah | 2*12V/7.2Ah | 4*12V/7.0Ah | 4*12V/7.2Ah | |
| Runtime (Half/Full Load) |
Full Load 3.0 minutes |
Full Load 2.0 minutes |
Full Load 3.0 minutes |
Full Load 2.5 minutes |
Full Load 4.0 minutes |
Full Load 3.5 minutes | |
| Half Load 8 minutes |
Half Load 7 minutes |
Half Load 8 minutes |
Half Load 7 minutes |
Half Load 15 minutes |
Half Load 13 minutes | ||
| Discharge Time | 1*(PC+17"Mon) >=2minutes |
2*(PC+17"Mon) >=2minutes |
3*(PC+17"Mon) >=4minutes |
3*(PC+17"Mon) >=5minutes |
4*(PC+17"Mon) >=6minutes |
5*(PC+17"Mon) >=6minutes | |
| Charge Time | ≤12 Hours,Charging Up to 90% | ||||||
| Display Status | LCD/VFD (Normal,Fault,Battery,Charge,Overload) | ||||||
| Audible Alarm |
Buzzer | AC Normal / Battery Mode / Battery Level / Fault | |||||
| Battery Mode | Beeping sound every 4 seconds after utility power fails. Beeping sound every second if battery approaches final discharge | ||||||
| Interface Port(s) |
Port | Rs-232 / USB | |||||
| Control Software | Monitor of Utility Fault,Power Failure, Battery,UPS Statu Indicator etc. | ||||||
| Software Function | 1.Anlysis of Power Status, 2.Timing Controlling, 3.Monitor UPS, 4.Execute UPS Self-diagnosis, 5.Automatic Save | ||||||
| Cold-start Capability | Yes | ||||||
| Protection | Surge Protection & Filtering |
High Voltage,Low Voltage,Surge,Spike | |||||
| Overload Protection |
110%~130% Automatic Cut Off Output,Buzzer Beeping(Battery Mode) | ||||||
| Battery Low Voltage Protection |
10V±0.2V Automatic Cut Off Output |
20V±0.2V Automatic Cut Off Output | |||||
| Output Short Circuit Protection |
Automatic Cut Off Output,Buzzer Beeping | ||||||
| EMI Filter | Yes | ||||||
| Tel/Fax/Modem Jack | Yes | ||||||
| Regulatory Approvals | CE | ||||||
| Operating Conditions |
Operating Temperature |
0℃~40℃ | |||||
| Storage Temperature |
-15℃~45℃ | ||||||
| Relative Humidity | 20% ~ 90% non-condensing | ||||||
| Dimension(mm) | 155*85*330 | 155*85*330 | 195*120*300 | 195*120*300 | 230*150*415 | 230*150*415 | |
| Net Weight(Kg) | 6.50 | 6.80 | 13.20 | 13.50 | 21.10 | 24.70 | |
